portable water well drilling machine is truck-mounted rotary drilling rig.The drilling rig adopts the chassis of DONGFENG TRUCK 6x4 or 6x6 special vehicle. The dies el engine, double hydraulic winches,mud pump, rotary table,mast, kelly are all installed on the chassis. BZC300CDF water well drilling rig can drill with mud pump, air compressor, air foam pump. It is highly adaptable to the stratum structure and can be used for drilling in clay, sand, highly weathered rock, bedrock, basalt and other strata.
Parameter of the truck mounted drilling rig
Main hook lifting capacity （kN）
Auxiliary hook lifting capacity（kN
Max- rope speed of main winch（m/min）
Max- rope speed of auxiliary winch（m/min）
Inner diameter （mm）
Rotate speed （rpm）
After sales service
◎Free warranty service and lifetime tracking service: Provide warranty service and lifetime tracking service according to after-sales service commitment, free maintenance during the warranty period, free replacement parts.
◎According to the customer's experience and geological conditions, we provide strategic choices for Binzhou rig models, provide intimate staff services for each user, and act as a good assistant for your investment.
◎Provide personalized service according to the special requirements of customers, provide drilling technology consulting services for complex geological conditions, freely train technicians for users, and provide extended services beyond key engineering information and operator training.
About Requirements for ordering services
With over 66 years of continuous experience building water well drilling rigs, BINZUAN rig is able to provide each customer with a rig custom tailored to his or her precise needs.Because many BINZUAN rigs have their own power source, rigs can be mounted to a customer's existing truck at our facility or we can ship the rig in skid form to the customer who can mount the rig to his existing truck or equipment.Complete engineering and technical support is provided by BINZUAN rig.
Every truck mounted drilling rig is engineered with our customers' needs in mind. Requests and suggestions from our customers for special features and drilling configurations have been incorporated into our entire product line.
Combined with truck mounted drilling rig craftsmanship, these innovations have helped BINZUAN rig produce a line of rigs that is unsurpassed in the industry for versatility and efficiency.
How to improve the production efficiency of hydraulic water drilling rigs?
1. After the drill bit of the hydraulic water well drilling rig is drilled into the structure, the center drilling tool needs to be replaced in time. First, you need to clean the bottom of the hole and then blow off the residue at the bottom of the hole. After the drill bit stops rotating, the drill bit in the hydraulic water well drilling rig is drilled. It is most suitable when the lifting force is slowly increased and the lifting force is just enough to lift the drill bit.
2. The drilling process summarizes the drill bits of the hydraulic water well rig. It is also necessary to pay close attention to the subsequent working conditions of the casing, to know the specific conditions of the drilling in time, to clean the drilling holes in time, and to drill the drill bit on the water drilling rig. Strong lifting is prohibited during this process.
3. There will be more residue at the bottom of the hydraulic well rig. The eccentric drill bit will be stuck by the slag and affect its collection and production. At this point, it is necessary to deliver compressed air and clean the holes again. And let the down-the-hole hammer work for a short time, the water well rig model, and then re-do the center drill lifting work.