600m Portable Multi-function Hydraulic Water Well Drilling Rig

600m Portable Multi-function Hydraulic Water Well Drilling Rig

BZCY600BZY hydraulic well drilling rig is direct rotary drilling rig. The truck chassis uses SINOTRUK brand 8×4 special chassis, 11.00R20 steel off-road tire tread, with good off-road performance.

Product Details

Product introduction:

BZCY600BZY hydraulic well drilling rig is direct rotary drilling rig. The truck chassis uses SINOTRUK brand 8×4 special chassis, 11.00R20 steel off-road tire tread, with good off-road performance.

Product parameters:

Technical parameter

Drilling depth(M)

600

Drilling diameter(mm)

500

Inner diameter of the rotary table(mm)

500

Speed of turntable(r/min)

117;102;60;38;23;13;16(reverse)

Torque of turntable(KN.m)

5.4---34(reverse)

Single rope lifting capacity of main windlass(KN)

50

The capacity of main windlass(KN)

300

Single rope lifting capacity of tool windlass(KN)

20

The rope capacity of tool windlass(m)

40

The lifting capacity of hook(KN)

320

Bearing capacity of mast (KN)

360

The effective height of mast (mm)

11800

The height of mast (mm)

12468

Bearing capacity (t)

36

Pipe

Kelly (mm)

108×108×7500

Assistant pipe (mm)

Ф89×10×6000

Hydraulic pump

Model

CBQL-F550/F532-CFHL

Pump delivery (ml/r)

50/32

Rated speed (r/min)

2000

Rated pressure(MPa)

20

3NB-130
plunger pump

Diameter of cylinder (mm)

100 110 120 130 140

Stroke of piston (mm)

160

Theory of flow (L / min)

1000

Rated pressure (Mpa)

5

Pounding times (min-1)

135

Diameter of suction tube (mm)

152

Diameter of drain pipe (mm)

65

Input speed (r / min)

565

Input power (kw)

95

Overall dimensions (mm)

2160*1400*1300

Weight (t)

3.9

Truck chassis

Model

TAZ5204TYT

Drive form

8×4

Engine

Model

SINOTRUK D10.27-40diesel engine

Rated power(KW)

196

Speed (r/min)

2200

Size (L*W*H)(mm)

11510×2480×2800

Drilling rig engine

Type

CUMMINS 6BTA5.9-C180 diesel engine

Power(kw)

132

Speed(r/min)

2200

Electric generator

Model

MF

Rated power (kw)

30

Rated voltage(v)

380

Rated current(A)

27

Speed (r/min)

1480

Frequency(Hz)

50

Protection level

IP21

Insulation Class

H

The best working gear (or speed)

5th gear(1000-1400r/min)

The highest speed(Km/h)

70

Weight (kg)

21650

Transport size(L*W*H)(mm)

12720×2490×4210

Working size(L*W*H)(mm)

11830×5370×

600zzy

Operating procedures:

1. Under no circumstances should the person in the upper section of the mast be allowed to stay under the mast.

2. In case of bad weather (rainstorm, heavy snow, icing or winds of level 5 or above), work on the mast is not allowed. At the same time, artificial lighting is not allowed to work on the mast.

3. It is strictly forbidden to use the stranded wire rope.

4. When the drill is raised and lowered, it is strictly forbidden to touch the wire rope by hand.

5. Except for the rig lifting and lowering, the drill pipe is strictly prohibited.

6. In order to prevent the drilling tool or the pump from pulling out of the well, it must be hooked with a hook made of a steel rod with a diameter of 15 to 20 mm.

7. When cleaning the pump, it should be looped with a strong and reliable wire rope, and placed at the lower end of the pump to turn it upside down.

8. All workers should leave the well when lifting or lowering the casing with a pulley and when the machine is working.

9. When the sleeve is pulled out with the jack, in order to avoid the sleeve falling off, it must be fixed to each other.

10. When the lighting is stopped (at night), the drilling work should be stopped.

11. it can automatically adjust the drilling speed for different geological conditions.

The drilling process can be achieved in pressruized drilling technology, adjust different pressure for different geological conditions, and can be viewed drilling pressure by pressure gauge. At the same time, it can adjust the drilling speed.

The drilling rig can achieved fast drilling by manually, especially for soil. It can achieved different speed for different soil.

It has a large lifting force hydraulic main hoist, stepless lift, and to achieve release rope quickly. When upgrading heavy, the lifting speed need slow to aviod crash the turntable and wellhead board. When put down single drill pipe, operate the quick handle, it can achieved release rope quickly like mechanical hoist.

It has a hydraulic tool hoist, the tool hoist has large lifting force and quick lifting speed, it is both easy to loading drill tools, drill pipe and drill accessories transport, and can slide up and down with anchors, its very convenient to load and unload the drill pipe.

It has a hydraulic cylinder control double card board forward and backward, it makes the insurance card board closed, to achieve stuck or release the pipe joints.

It use integrated design of pneumatic, to achieve the 3NB-130 mud pump clutch using pneumatic remote control, it has high degree of automation and easy-saving operation.

It is installed 4 hydraulic legs and 2 mechanical legs, every hydraulic leg rod with locknut。After leveling the rig, it can lock the cylinder use locknut. So, even if the cylinder leaks, the chassis is not instability.

The turntable use stir bars, internal turntable use spiral arc gear to transmission, it has large torque, it about 2 times of similar products at domestic and foreign.

It is installed a generator (30kw) , so that it is convenient to illuminate or work at night.

swivel

The swivel is the equipment of rotary system, and it is also a component of the water cycle system. It is under the swimming pulley, and it is connected with the high-pressure hose and main drill pipe/kelly. The V-shape seal ring and the core tube are the wearing parts. When the rig is working, it is usually to check the swivel, see if it works well. If it leaks mud, adjust the locking nut on the tap. If it can not be resolved, The V-shape seal ring and core pipe should be replaced.

After sales service

◎Free warranty service and lifetime tracking service: Provide warranty service and lifetime tracking service according to after-sales service commitment, free maintenance during the warranty period, free replacement parts.

◎According to the customer's experience and geological conditions, we provide strategic choices for Binzhou rig models, provide intimate staff services for each user, and act as a good assistant for your investment.

◎Provide personalized service according to the special requirements of customers, provide drilling technology consulting services for complex geological conditions, freely train technicians for users, and provide extended services beyond key engineering information and operator training.

Main functions of drilling:

1. Obtain underground physical data and obtain core, cuttings, oil, water, natural gas, etc. from the bottom of the well.

2. As a geophysical logging channel, obtain data on various geophysical fields of the rock formation, such as underground military fire tests.

3. As an artificial channel, observe the mineral, hydrological and geological structures in the stratum.

4. Comprehensive application, comprehensive exploration and acquisition, and the use of underground resources.

Hot Tags: mobile rotary water borehole drilling machine, China, manufacturers, suppliers, factory, price, cheap, for sale

Matters Attention

1. All the members should listen to the unified command of the captain, The workers should wear a helmet, and with the safety belts when climb the tower.

2. It is a good job to record the drilling process.

3. In the process of drilling, it is necessary to pay attention to the changing situation at any time, if there is unusual noise, turn resistance increases, mutation load, the pressure of mud is inadequate , the mud reduce or not to return back, etc. It is necessary to immediately take measures to deal with the abnormality. If it is of no effect, please lift the tools and check.

4. In the loose stratum, it should not be a long time to drill, and it must be slowly to lift or fall the tools. When drill or complete, it must inject the mud to the hole at once, it will prevent the collapse.

5. If the tools are locked in the hole, it must act the tools up an down. When the tools are loosed, and then lift the tools.

6. When complete the drilling, it must lift out the tools and put them to the safe place, it will prevent burying the tools.

7.Adjusted according to different strata of the viscosity of drilling mud, and select the appropriate bit or other drilling method used.

8. It is strictly prohibited to make the rig be in the long-term overloading situation.

9. Can not bump the screw thread of drill pipe when carry them, take protective measures. When use the dill pipe, please clean the screw thread and smear grease.

10. The compression device using the wire rope is used only mild pressure in the hard layer.(And the pressure is less than 1 ton) It must not be forced, otherwise the bored will easily tilt. So it is recommended to use drill collar to press.


600zzy

Hot Tags: 600m portable multi-function hydraulic water well drilling rig, China, manufacturers, suppliers, factory, price, cheap, for sale

Inquiry

You Might Also Like