BZC600BLBC deep water well drilling machines also known as full hydraulic rig. A rig that uses hydraulic pressure to drive and control all moving parts. This type of drilling rig realizes stepless speed change by high-pressure variable oil pump, which simplifies the transmission mechanism and removes the gear transmission. It not only reduces the weight of the rig but also fully utilizes the power. At the same time, the rig has a high speed, stable operation, convenient and safe operation, easy to realize automation and instrumentation, and is particularly suitable for drilling water borehole.
Speed of turntable（r/min）
Torque of turntable（KN.m）
Single rope lifting capacity of main windlass(KN)
Maximum lifting capacity of main windlass(KN)
Single rope lifting capacity of assistant windlass(KN)
Maximum lifting capacity of assistant windlass(KN)
The lifting capacity of hook（KN）
Bearing capacity of drilling tower (KN)
The height of drilling tower (mm)
Assistant pipe (mm)
Diameter of cylinder (mm)
Stroke of piston (mm)
Theoretical flow (L / min)
1200 970 846 467
Rated pressure (Mpa)
4.5 5.5 6.5 12
Diameter of suction tube (mm)
Diameter of drain pipe (mm)
Input power (kw)
Rated power (kw)
The highest speed（Km/h）
1.BZC600BLBC truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotary drilling rig.
2.The truck chassis adopts the special crane chassis of brand BENZ and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
3.This rig is a rotary drilling rig with directional circulation. It is equipped with WB1200/12 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
The power of drilling rig comes from the truck engine; the rig has distribute implement and hydraulic system.
4. We can install the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine.
We set up a generator (MF) which is convenient to illuminate or work at night.
1 The new rig running a month, you should replace the FAST gearbox oil and carousel summer with 85W / 90GL-5 gear oil, in winter with 85W / 90GL-4 gear oil.
2 It should be checked before each operation of the rig parts of lubrication, mud pump oil lubrication of the piston rod box to promptly fill lubricating oil in a timely manner to facilitate the box dripping oil on the piston rod, extend the life of the rod. Dongfeng to observe the oil level in the gearbox and wheel.
3 Check the rolling bearing seal is intact, any abnormal sound, ran, fever;
4 If broken wire rope off shares must be replaced immediately;
5 Swivel adjustment: if the swivel leak water ,adjusting nut to adjust the ring gap or replace a new seal;
6 Adjust swivel: there will be leak if the sealing rings broken. And you can adjust its nut or change the new sealing rings for solving.
7 Truck diesel engine's maintenance(Refer to the chassis engine specification)
Hot Tags: truck mounted water well drilling machine, China, manufacturers, suppliers, factory, price, cheap, for sale