1.BZC600CDF truck mounted water drilling rig is truck-mounted rotary drilling rig. The drilling rig adopts the chassis of DONGFENG chassis 6X6 or 8x4 special vehicle.
2.The diesel engine, double hydraulic winches,mud pump, rotary table,mast, kelly are all installed on the chassis.
3.It equipped with independent 132KW/2200rpm diesel engine for drilling and install generator set (MF) to provide night lighting or welding maintenance at the construction site .
4.According to the local geological conditions, BZC600CDF drilling rig can drill with mud , DTH hammer, air foam and hydro-hammer. It is highly adaptable to the stratum structure and can be used for drilling in clay, sand, highly weathered rock, bedrock, basalt and other strata.
Main hook lifting capacity （kN）
Auxiliary hook lifting capacity（kN
Max- rope speed of main winch（m/min）
Max- rope speed of auxiliary winch（m/min）
Inner diameter （mm）
Rotate speed （rpm）
1. Can it work with tricone bit?
Yes, it can. We can equip tricone bit as your size, and together with connector for drill bit and drill rod, for your convenient use.
2. Can it drill hard rocks? How fast?
First, the ground type can be soil, sand, gravel, hard rocks, mixed ground, etc. Second, if your ground is all large blocks of granite, limestone, we will suggest you use our other models, like BZC-series, which is air compressor feeding type, specially designed for complete blocks of hard rocks.
The drilling speed in soil and sand is 15~25m per hour.
The drilling speed in rocks is 6~8m
The drilling speed in hard rocks, like granite, is 1~2m per hour.
3. Can it be customized as crawler type?
Yes, sure. as following picture:
The legs are hydraulic type.
4. what kinds of drill bits can we use for BZC600BLBC water well drilling machine?
Three wing bit for open hole, or drill in soil, sand, and gravel.
Alloy bit is for soil, sand and very soft rock ground.
PDC bit is to drill soft rock and hard rock.