Diesel Power Type water well drilling machine
Product introduction:
BZCY400WY truck mounted borehole drilling machine is a directly rotary drilling rig. This truck chassis is adopt the 6×4 special chassis of brand SINOTRUK, 11.00R20 steel off-road tire tread, with good off-road performance.
Product parameters:
Technical parameter | |||
Drilling depth(M) | 400 | ||
Drilling diameter(mm) | 500 | ||
Speed of turntable(r/min) | 117;102;60;38;23;13;16(reverse) | ||
Torque of turntable(KN.m) | 5.4---50(reverse) | ||
Single rope lifting capacity of main windlass(KN) | 45 | ||
The capacity of main windlass(KN) | 270 | ||
Single rope lifting capacity of tool windlass(KN) | 20 | ||
The rope capacity of tool windlass(m) | 40 | ||
The lifting capacity of hook(KN) | 270 | ||
Bearing capacity of mast (KN) | 270 | ||
The height of mast (mm) | 12500 | ||
Bearing capacity (t) | 36 | ||
Pipe | Kelly (mm) | 108×108×7500 | |
Assistant pipe (mm) | Ф89×10×5500 | ||
Hydraulic pump | Pump delivery (ml/r) | 50/32 | |
Rated speed (r/min) | 2000 | ||
Rated pressure(MPa) | 20 | ||
Diameter of cylinder (mm) | 150 | ||
Stroke of piston (mm) | 180 | ||
BW850/2 | Theory of flow (L / min) | 600 850 | |
Rated pressure (Mpa) | 3 2 | ||
Pounding times (min-1) | 58 82 | ||
Diameter of suction tube (mm) | 127 | ||
Diameter of drain pipe (mm) | 64 | ||
Input speed (r / min) | 470 | ||
Input power (kw) | 40 | ||
Overall dimensions (mm) | 2000*1030*1400 | ||
Weight (t) | 1.5 | ||
Truck chassis | Model | SINOTRUK | |
Drive form | 6×4 | ||
Engine | Model | WP7.210E40 diesel engine | |
Rated power(KW) | 155 | ||
Speed (r/min) | 2300 | ||
Size (L*W*H)(mm) | 10198×2490×2980 | ||
Electric generator | Model | MF | |
Rated power (kw) | 30 | ||
Rated voltage(v) | 400 | ||
Rated current(A) | 27 | ||
Speed (r/min) | 1500 | ||
Frequency(Hz) | 50 | ||
Protection level | IP21 | ||
Insulation Class | H | ||
The best working gear (or speed) | 5th gear(1000-1400r/min) | ||
The highest speed(Km/h) | 70 | ||
Weight (kg) | 21650 | ||
Transport size(L*W*H)(mm) | 12740×2490×4210 | ||
Working size(L*W*H)(mm) | 10780×3040×13800 |
Details
1. Truck type borehole drilling rig is convenient and flexible for moving. All devices are installed on the chassis, which is convenient for integration and movement. It adopts cross-country vehicle chassis to adapt to bad road condition.
2. Comprehensive design makes the machine work steady in extremely harsh climate.
3. For the high integration degree, preparation work before operation is quick and convenient.
4. It is applicable to the field of metallurgy, geology, petroleum, coal, water conservancy, forestry, troops, building materials and so on.
5. It is suitable for operating in clay layer, sand layer, gravel layer, gravel layer, bed rock, etc.
6. All rigs all adopt full hydraulic control, which is simple and convenient.
7. It is featured with low maintenance cost.
8. Our drilling equipments are accredited by the ISO9001:2008 certification, military enterprises certification and the implementation of national and military standards.
Points for attention of using the truck mounted drilling rig
1. Clean the outside of the drilling rig, and pay attention to the cleaning and excellent smoothness of the base slide way and the vertical shaft of the drilling rig.
2. Check whether all the exposed bolts, nuts, secure pins, etc. are firm and reliable.
3. Add smooth oil or grease according to the requirement of smoothness.
4. Check the oil surface position of gearbox, transfer box and oil tank of hydraulic system.
5. Check the oil spill situation everywhere and solve it according to the situation.
6. Handle the problems that occurred before the well drilling rig and open it after confirmation.
Engineering case:
Our factory BZC150DF, BZC350CZ, BZC350ZY, BZC350CA and other different models are constructed in Yunnan, Xinjiang, Liaoning, Heilongjiang, Shandong and other regions.
FAQ:
1.Q: Are you a manufacturer?
A: Yes, we are a professional rotary drilling rig manufacturer.
2.Q: What does your company produce?
A: The main products of our company include rotary drilling rig.
3.Q: How about your delivery time?
A: Normally the delivery time is about 7-15 days. For some specialcase, we can make it within 2 weeks, it depends on different products.
4.Q: What methods of payment do you accept?
A: We accept T/T
5.Q: Do you offer any deals or discounts?
A: Yes, price depends on different quantity, different quantity will give you different price.