portable water well drilling machine is truck-mounted rotary drilling rig.The drilling rig adopts the chassis of DONGFENG TRUCK 6x4 or 6x6 special vehicle. The dies el engine, double hydraulic winches,mud pump, rotary table,mast, kelly are all installed on the chassis. BZC300CDF water well drilling rig can drill with mud pump, air compressor, air foam pump. It is highly adaptable to the stratum structure and can be used for drilling in clay, sand, highly weathered rock, bedrock, basalt and other strata.
Parameter of the truck mounted drilling rig
Main hook lifting capacity （kN）
Auxiliary hook lifting capacity（kN
Max- rope speed of main winch（m/min）
Max- rope speed of auxiliary winch（m/min）
Inner diameter （mm）
Rotate speed （rpm）
Details of the truck mounted drilling rig
1.Truck mounted drilling rig is a portable drilling rig, with integrated tower, four hydraulic legs,two hydraulic winches, mud pump, rotating method, mobile base, hydraulic drilling operating deck etc.
2.It is very widely used for water well, geological exploration, mining exploration, geothermal well, irrigation well, bridge conservancy, etc.
3. Very popular in market from Kenya, Nigeria, Ethopia, Mombasa, Uganda, South Africa, Zimbabwe, Chile, Peru, Malaysia,Dominica, India, etc.
About Requirements for ordering services
With over 66 years of continuous experience building water well drilling rigs, BINZUAN rig is able to provide each customer with a rig custom tailored to his or her precise needs.Because many BINZUAN rigs have their own power source, rigs can be mounted to a customer's existing truck at our facility or we can ship the rig in skid form to the customer who can mount the rig to his existing truck or equipment.Complete engineering and technical support is provided by BINZUAN rig.
Every truck mounted drilling rig is engineered with our customers' needs in mind. Requests and suggestions from our customers for special features and drilling configurations have been incorporated into our entire product line.
Combined with truck mounted drilling rig craftsmanship, these innovations have helped BINZUAN rig produce a line of rigs that is unsurpassed in the industry for versatility and efficiency.
Points for attention of using the truck mounted drilling rig
1. Clean the outside of the drilling rig, and pay attention to the cleaning and excellent smoothness of the base slide way and the vertical shaft of the drilling rig.
2. Check whether all the exposed bolts, nuts, secure pins, etc. are firm and reliable.
3. Add smooth oil or grease according to the requirement of smoothness.
4. Check the oil surface position of gearbox, transfer box and oil tank of hydraulic system.
5. Check the oil spill situation everywhere and solve it according to the situation.
6. Handle the problems that occurred before the well drilling rig and open it after confirmation.
Maintenance method of the truck mounted drilling rig
1 The new rig running a month, you should replace the FAST gearbox oil and carousel summer with 85W / 90GL-5 gear oil, in winter with 85W / 90GL-4 gear oil.
2. It should be checked before each operation of the rig parts of lubrication, mud pump oil lubrication of the piston rod box to promptly fill lubricating oil in a timely manner to facilitate the box dripping oil on the piston rod, extend the life of the rod. Dongfeng to observe the oil level in the gearbox and wheel.