truck mounted well drilling machines is truck-mounted rotary drilling rig.The drilling rig adopts the chassis of DONGFENG TRUCK 6x4 or 6x6 special vehicle. The dies el engine, double hydraulic winches,mud pump, rotary table,mast, kelly are all installed on the chassis. BZC400CDF water well drilling rig can drill with mud pump, air compressor, air foam pump. It is highly adaptable to the stratum structure and can be used for drilling in clay, sand, highly weathered rock, bedrock, basalt and other strata.
Main hook lifting capacity （kN）
Auxiliary hook lifting capacity（kN
Max- rope speed of main winch（m/min）
Max- rope speed of auxiliary winch（m/min）
Inner diameter （mm）
Rotate speed （rpm）
1. Truck type borehole drilling rig is convenient and flexible for moving. All devices are installed on the chassis, which is convenient for integration and movement. It adopts cross-country vehicle chassis to adapt to bad road condition.
2. Comprehensive design makes the machine work steady in extremely harsh climate.
3. For the high integration degree, preparation work before operation is quick and convenient.
4. It is applicable to the field of metallurgy, geology, petroleum, coal, water conservancy, forestry, troops, building materials and so on.
5. It is suitable for operating in clay layer, sand layer, gravel layer, gravel layer, bed rock, etc.
6. All rigs all adopt full hydraulic control, which is simple and convenient.
7. It is featured with low maintenance cost.
8. Our drilling equipments are accredited by the ISO9001:2008 certification, military enterprises certification and the implementation of national and military standards.
About Requirements for ordering services
With over 66 years of continuous experience building water well drilling rigs, BINZUAN rig is able to provide each customer with a rig custom tailored to his or her precise needs.Because many BINZUAN rigs have their own power source, rigs can be mounted to a customer's existing truck at our facility or we can ship the rig in skid form to the customer who can mount the rig to his existing truck or equipment.Complete engineering and technical support is provided by BINZUAN rig.
Every truck mounted well drilling machines is engineered with our customers' needs in mind. Requests and suggestions from our customers for special features and drilling configurations have been incorporated into our entire product line.
Combined with truck mounted well drilling machines craftsmanship, these innovations have helped BINZUAN rig produce a line of rigs that is unsurpassed in the industry for versatility and efficiency.
1 The new rig running a month, you should replace the FAST gearbox oil and carousel summer with 85W / 90GL-5 gear oil, in winter with 85W / 90GL-4 gear oil.
2 It should be checked before each operation of the rig parts of lubrication, mud pump oil lubrication of the piston rod box to promptly fill lubricating oil in a timely manner to facilitate the box dripping oil on the piston rod, extend the life of the rod. Dongfeng to observe the oil level in the gearbox and wheel.
3 If broken wire rope off shares must be replaced immediately;
4 Swivel adjustment: if the swivel leak water ,adjusting nut to adjust the ring gap or replace a new seal;
5 Adjust swivel: there will be leak if the sealing rings broken. And you can adjust its nut or change the new sealing rings for solving.
6 Truck diesel engine's maintenance(Refer to the chassis engine specification)