China Truck Mounted Drilling Rig

China Truck Mounted Drilling Rig

BZC600CDF truck mounted water drilling rig is truck-mounted rotary drilling rig. The drilling rig adopts the chassis of DONGFENG chassis 6X6 or 8x4 special vehicle.

Product Details

Product introduction:

1.BZC600CDF truck mounted water drilling rig is truck-mounted rotary drilling rig. The drilling rig adopts the chassis of DONGFENG chassis 6X6 or 8x4 special vehicle.

2.The diesel engine, double hydraulic winches,mud pump, rotary table,mast, kelly are all installed on the chassis.

3.It equipped with independent 132KW/2200rpm diesel engine for drilling and install generator set (MF) to provide night lighting or welding maintenance at the construction site .

4.According to the local geological conditions, BZC600CDF drilling rig can drill with mud , DTH hammer, air foam and hydro-hammer. It is highly adaptable to the stratum structure and can be used for drilling in clay, sand, highly weathered rock, bedrock, basalt and other strata.

Product parameters:

Parameter

Drill depth

600(m)

Drill rod

89mm(3-1/2”)

Winch capacity

Main hook lifting capacity (kN)

300

Auxiliary hook lifting capacity(kN

200

Max- rope speed of main winch(m/min)

60

Max- rope speed of auxiliary winch(m/min)

60

Rotary table

Inner diameter (mm)

500

Rotate speed (rpm)

96;76;44;24;12

Max-torque(kN.m)

35

Mast

Height(mm)

15255

Rated load(t)

36

Drill tool

Kelly(mm)

108*108*10500

Drill rod(mm)

89*9000

Mud pump
3NB-130

Displacement 1000L/min

Pressure 5Mpa

Diesel engine

Cummins 6BT5.9-C180

132KW/2200rpm

Transportation size

L*W*H (mm)

16500*2500*4200

6001

Measures for the use of the water well rig during the running-in period

1. The operator should receive training and guidance from the manufacturer, have a thorough understanding of the structure and performance of the rig, and obtain certain operation and maintenance experience before operating the machine. The product maintenance and repair instructions provided by the manufacturer are the necessary information for the operator to operate the equipment. Before operating the machine, be sure to read the maintenance instructions and operate and maintain according to the requirements of the manual.

2. Pay attention to the working load during the running-in period. The working load during the running-in period should not exceed 80% of the rated working load, and the appropriate workload should be arranged to prevent the overheating caused by the continuous operation of the machine for a long time.

Measures for the use of the water well rig during the running-in period

1. The operator should receive training and guidance from the manufacturer, have a thorough understanding of the structure and performance of the rig, and obtain certain operation and maintenance experience before operating the machine. The product maintenance and repair instructions provided by the manufacturer are the necessary information for the operator to operate the equipment. Before operating the machine, be sure to read the maintenance instructions and operate and maintain according to the requirements of the manual.

2. Pay attention to the working load during the running-in period. The working load during the running-in period should not exceed 80% of the rated working load, and the appropriate workload should be arranged to prevent the overheating caused by the continuous operation of the machine for a long time.

3. Pay attention to the indications of each instrument frequently. If an abnormality occurs, it should be stopped in time to be excluded. If the cause is not found, the operation should be stopped before the fault is not eliminated.

4. Pay attention to check the position and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) frequently, and pay attention to check the sealing performance of the whole machine. During the inspection, it was found that the oil and water were too much, and the reason should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that the lubrication point be filled with grease for each shift during the running-in period (except for special requirements).

5. Keep the machine clean, adjust and tighten the loose parts in time to prevent the parts from being worn out or the parts being lost due to looseness.

6002


Hot Tags: china truck mounted drilling rig, China, manufacturers, suppliers, factory, price, cheap, for sale

Inquiry

You Might Also Like