Tractor Mounted Well Drilling Rig

Tractor Mounted Well Drilling Rig

CYT300D tractor mounted well drilling rig is designed with gantry trailer type, mast rising up by itself, suitable for buildings, bridges, geological mines, harbors, dam foundations, well construction, ground source heat pump drilling construction.

Product Details

Product introduction:

CYT300D tractor mounted well drilling rig is designed with gantry trailer type, mast rising up by itself, suitable for buildings, bridges, geological mines, harbors, dam foundations, well construction, ground source heat pump drilling construction.

未标题-1


Product parameters:

Drill depth(m)

300

Drill diameter(mm)

500

Inner diameter of turntable(mm)

340

Ntable rotation speed(forward and reverse)(r/min)

36;52

Rated output torque of turntable(KN.m)

10

Main hoist lifting capacity(single rope)(KN)

30

Bearing capacity of hydrant(KN)

150

Matching power of main machine(KW)

22

The weight of whole machine(kg)

3210



Rig operation

1、 preparation

⑴Check all the parts, Reinforcement if necessary

⑵Check Gearbox oil and lubricating grease for each rotation part

The gearbox is refueling to limited oil levelWhen there is no oil screw plug, take the shaft

The lowest position of the bearing hole is the height of the oil surface

⑶Check all the hand shank and in neutral position

⑷Flexible rotation of operating parts

⑸Check that the power line or diesel engine is ready before starting, and that the direction of rotation is correct.


In case of personal accident and prolonging service life, the customer must do the following:

1、Regular inspection, maintenance

2、After the rig is used for a period of time, usually one to two months or 300 to 500m,Cleaning machine, clearance adjustment

3、Oil should be injected to lubricate all rotation parts during well drilling

4、Abnormal noise during rig operation, high temperature or apparent displacement of parts, all required to Stop check the cause, troubleshooting after the start.

5、When moving, the tower should be lowered slowly and not fall down

6、When drilling is needed, the drilling tools should be sent slowly.

7、Use drill bits of different shapes for different formations

8、The drill pipe must be bent and the thread should be protected when unloading the drill pipe or handling.

9、The clutch adjustment is shown in the attached drawings


CYT300D water drilling rig fault repair:

1. Maintenance by professional and technical personnel;

2. Construction professional maintenance tools, negotiating reasonable maintenance methods;

3. Improve work efficiency while ensuring maintenance quality.


Inquiry