BZT600 drilling rig is trailer mounted water drilling rig, and works with an independent diesel generator, mud pump, double hoist unit, rotary table, drilling tower and other parts.
Main hook lifting capacity （kN）
Auxiliary hook lifting capacity （kN）
Max- rope speed of main winch（m/min）
Max- rope speed of auxiliary winch（m/min）
Inner diameter （mm）
Rotate speed （rpm）
Pressure 5 Mpa
BZT600 drilling rig is equipped with a special trailer chassis, and works with an independent diesel generator, mud pump, double hoist unit, rotary table, drilling tower and other parts. It can be pulled by tractor or car tractor. The drill tower is a k-shaped truss structure with good stability and large bearing capacity. It is suitable for high-rise buildings, bridges, geological mines, ports, dam foundation, well construction, complex ground source heat pump drilling construction. It is the best choice for users with simple operation, strong usability, easy maintenance, less investment, quick effect.
The structure of rig
The Rig is composed of the trailer chassis 1, mud pump 2, generator power 3, hydraulic system 4, double winch 5, transmission shaft 6, turn-table 6, drill tower 8, drill rod 9, swivel 10, and other parts.
The importance of maintenance
The rig life depends to some extent on its maintenance, and create good running condition, timely and proper conduct maintenance, not only to extend the use of time, but also to prevent unnecessary machinery accidents, and can reduce power consumption improve efficiency, give full play to the potential capabilities of the device, on the contrary, such as maintenance ill, it may continue to occur suddenly or mechanical accident, or even cause injury. Rig users must fully understand the principles of the structure of the rig, safe operation, maintenance, maintenance and other aspects of knowledge. Seriously do maintenance work, keeping equipment well, to improve economic performance and efficiency rigs.
Friction surface on the rig ministries, mating surfaces, the bearing surface for proper lubrication is an important guarantee for the good functioning of the rig. When used, the lubricant must be different under different circumstances, in different ways and different lubrication lubrication cycle, achieve a reasonable use of economic effects.
As for sealing strong, using the temperature difference between the high speed parts, try using fluid lubrication; sealing simple, heavy dynamic loads of parts, high temperature and pressure parts using thick grease; For small force, low-speed, mechanical intermittent, usable timed drip lubrication, see lubrication system.