BZC400ABC diesel engine water drilling rig is designed by our engineers; it is adopt truck mounted and is a rotary drilling rig.
Speed of turntable（r/min）
Torque of turntable（KN.m）
Single rope lifting capacity of windlass（KN）
The capacity of main windlass(KN)
Single rope lifting capacity of hydraulic windlass(KN)
The capacity of hydraulic windlass(KN)
The lifting capacity of hook（KN）
Bearing capacity of mast (KN)
The height of mast (mm)
Bearing capacity (t)
Assistant pipe (mm)
Pump delivery (ml/r)
Rated speed (r/min)
Diameter of cylinder (mm)
Stroke of piston (mm)
Theory of flow (L / min)
Rated pressure (Mpa)
Pounding times (min-1)
Diameter of suction tube (mm)
Diameter of drain pipe (mm)
Input speed (r / min)
Input power (kw)
Overall dimensions (mm)
Rated power (kw)
The best working gear (or speed)
The highest speed（Km/h）
It is SINOTRUK 8X4 chassis special made rig.The diesel engine, double hydraulic winches,two types mud pump, rotary table, mast, kelly are all installed on the chassis. It equipped with generator set (MF) and shall provide convenience for night lighting or welding maintenance at the construction site . BZCLY400XWY drilling rig is a kind of direct and reverse circulation drilling rig. It can drill with drill pipe 89mm in mud or air compressor drilling ways, besides it can drill with reverse pump for piling for big hole. It is highly adaptable to the stratum structure and according to the local geological conditions, can be used for drilling in clay, sand, highly weathered rock, bedrock, basalt and other strata.
What is a water well rig?
Simply speaking, a water well drilling rig is a mechanical device that drills a water well and completes downhole pipe, well washing, etc., including power equipment and drill bits, drill pipes, core pipes, drill stands, and so on. The following is a brief introduction to the classification and working principle of water well drilling rigs and the correct use of water well drilling rigs. Water well drilling rig mechanism composition 1. Hydraulic oil pump: It is a double-type, large-displacement pump provides power for the power head. The small-displacement pump provides power for four-legged cylinders, landing mast cylinders, and afterburning/lifting cylinders. 2. Four legs: The small well drilling equipment consists of a hydraulic cylinder and a fixed frame. Adjust the level of the body at the job site
Points for attention of using the truck mounted drilling rig
1. Clean the outside of the drilling rig, and pay attention to the cleaning and excellent smoothness of the base slide way and the vertical shaft of the drilling rig.
2. Check whether all the exposed bolts, nuts, secure pins, etc. are firm and reliable.
3. Add smooth oil or grease according to the requirement of smoothness.
4. Check the oil surface position of gearbox, transfer box and oil tank of hydraulic system.
5. Check the oil spill situation everywhere and solve it according to the situation.
6. Handle the problems that occurred before the well drilling rig and open it after confirmation.