What ways well drilling rigs drill large-scale well drilling works

- May 29, 2019-

       Large-scale drilling project can not be separated from the use of well drilling rig equipment, its good performance greatly improve the speed and efficiency of drilling, especially in remote areas of the use of well drilling rigs more extensive, but for the way this equipment works a lot of friends are not very understanding, the following for you to do a detailed description.

  So how does the well rig work? Well drilling rigs work by pumping recirculation. It works by the role of atmospheric pressure, the circulating fluid from the sedimentation pool through the back ditch along the well hole ring gap flow to the bottom of the well, because at this time the turntable drive drill pipe, drive the drill bit rotation drilling, by the mud pump suction to build the debris mud into the drill pipe cavity, and then rise to the tap, through the mud pump drain into the sediment pool,

  The precipitated circulatory fluid continues to flow into the wellbore, so that it is so repeated that a counter-cycle drilling work is formed. Mud or water enters from the drill pipe and flows out of the wellhead. Drilling rigs for positive circulation wells. Mud or water is sucked out of the drill pipe and flows in from the wellhead. For the anti-cycle well drilling rig. Positive and negative cycle refers to the drilling fluid (mud or water) in the well drilling rig in the circulation way said, the well drilling rig drill bit in the drilling will produce slag, slag, etc. , through the positive and negative cycle can be carried by the mud these slags to the ground, and then after precipitation after the sedimentation of the mud back to the drilling. This non-stop cycle, and finally into a hole. The reverse cycle can lead out slag with a large diameter.